Multicolour printing on Creality CR-10-V3 with Cura

This is a detailed guide on colour printing with a single extruder.

 

Multicolour printing can really lift some prints, especially where appearance is more important than functionality.

The Cura slicer provides good support for this process.

3D Printing via Cura on Linux

I'm getting a bit bored with transferring g-code files to my printer's SD card.

 

Its not one of life's most difficult tasks.

But I thought I'd try printing from my laptop, and see how I get on with it.

3D Printing: sticking and removing

This post is primarily concerned with 2 issues;

 

1) Getting your prints to stick to the bed

2) Getting your prints off the bed

3D Printing: I'm back in the saddle!

It is almost 8 years since I've posted anything on 3D printing.

 

That's largely because its almost 8 years since I last touched a 3D printer.

Well now that I have my own printer...I'm back!