FreeCAD: Pads & Pockets

I'm slowly getting to grips with FreeCAD...

 

...but its certainly been challenging.

In this post I describe how to make a simple structure including holes & cutouts.

Starting FreeCAD: making name plates

Drawing my own objects in 3D is the next logical step on my 3D Printing adventure.

However, 3D CAD software can be tricky to get your head around.

But this is how I designed a few 3D name plates.

Multicolour printing on Creality CR-10-V3 with Cura

This is a detailed guide on colour printing with a single extruder.

 

Multicolour printing can really lift some prints, especially where appearance is more important than functionality.

The Cura slicer provides good support for this process.

3D Printer control via Gambas

Its easy to write some Gambas code to provide basic control of a 3D printer.

You just need a good G-code reference list.

These notes were born out of a few experiments I recently conducted with my Creality CR-10-V3

3D Printing via Cura on Linux

I'm getting a bit bored with transferring g-code files to my printer's SD card.

 

Its not one of life's most difficult tasks.

But I thought I'd try printing from my laptop, and see how I get on with it.

My Bleepin' 3D Printer

My printer knows how to bleep!

 

That is to say that the controller has some kind of audio transducer which can make sounds.

So this post is about putting it to use.

3D Printing: printer to Linux computer serial link

There may be times when you want to link your printer to a Linux laptop via the serial link.

 

Its very handy to be able to slice and print straight from a connected computer.

...so here is the procedure.

3D Printing: time to replace the nozzle?

During the last 7 or 8 days, something bad has happened.

 

My 3D printer has been producing rubbish.

Something rather unexpected seems to have solved my problem.

3D Printing: sticking and removing

This post is primarily concerned with 2 issues;

 

1) Getting your prints to stick to the bed

2) Getting your prints off the bed

3D Printing: I'm back in the saddle!

It is almost 8 years since I've posted anything on 3D printing.

 

That's largely because its almost 8 years since I last touched a 3D printer.

Well now that I have my own printer...I'm back!