Multicolour printing on Creality CR-10-V3 with Cura

This is a detailed guide on colour printing with a single extruder.

 

Multicolour printing can really lift some prints, especially where appearance is more important than functionality.

The Cura slicer provides good support for this process.

3D Printer control via Gambas

Its easy to write some Gambas code to provide basic control of a 3D printer.

You just need a good G-code reference list.

These notes were born out of a few experiments I recently conducted with my Creality CR-10-V3

3D Printing via Cura on Linux

I'm getting a bit bored with transferring g-code files to my printer's SD card.

 

Its not one of life's most difficult tasks.

But I thought I'd try printing from my laptop, and see how I get on with it.

My Bleepin' 3D Printer

My printer knows how to bleep!

 

That is to say that the controller has some kind of audio transducer which can make sounds.

So this post is about putting it to use.

Filament "pull" affecting 3D print performance

Friction in the filament feed path can affect 3D printer performance...

 

...or at least that is the conclusion I have come to over the last few days.

Here are my notes to back this up.